Liquid membrane application instructions

“ART PRO DELUXE” – Ultra-High Viscosity Epoxy Resin For Artists

The best choice for Resin and Geode-art, making Coasters, Trays, Ocean-art, jewellery and casting surfaces. + gloves & detailed instruction for FREE.

£33.85

“EPOXYTABLE 5-FIVE” – Deep Pour Epoxy Resin (Up to 5cm) for Tables & Large Projects

The best choice for deep pouring: ✔️ Low exothermic reaction –> Castings up to 5cm [1,96”] ✔️ Strong UV filters –> Non-yellowing guaranteed for 5 years ✔️ Highly mechanical resistant surface, for maximum scratchproof properties ✔️ Low viscosity –> Bubbles free ✔️ Long working time –> No rush in the process ✔️ Heat resistance –> Up to 70°C [158 F] ✔️ Trusted quality –> We have already sold more than 26000 kits of this product, since we started in 2015 🌿 Cruelty Free, Vegan Friendly🐹

£16.85

“ICRYSTAL” – Clear Epoxy Resin (Up to 1.5cm) – High quality and great price

✔️ Perfect transparency -> A true liquid crystal ✔️ High scratch resistance -> Ideal for tables! ✔️ UV filter for protection against yellowing -> 10 years warranty. ✔️ Heat Resistance (Up to 70°C) ✔️ Easy to use -> 2:1 mixing ratio ✔️ Odourless ✔️ 1,5сm layer per application 🌿 Cruelty Free, Vegan Friendly🐹

£11.65

“Art Pro” – Clear Epoxy Resin for Artists & Surfaces Coating

Experience the brilliance of 'Art Pro', an ultra-clear, non-toxic epoxy resin designed specifically for artists and DIY enthusiasts. Perfect for a variety of resin art projects/p>

£19.85

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85

Liquid membrane application instructions

Applying a liquid waterproofing membrane is a fairly simple process, but it requires attention and precision. Here are the general instructions for applying a liquid membrane:

1. Surface preparation: Ensure that the surface is clean, dry, and free from dust, grease, or other impurities.
2. Primer application: Apply the specific primer for the type of surface on which you want to apply the liquid membrane. Allow it to dry completely.
3. Membrane application: Pour the liquid membrane on the area to be treated and spread it evenly using a brush, roller, or spatula.
4. Layering: Depending on the product specifications, it may be necessary to apply multiple layers of membrane, respecting the drying times between each layer.
5. Drying: Allow the membrane to dry for the time indicated in the manufacturer's instructions. Always remember to carefully follow the specific instructions of the chosen liquid membrane manufacturer to ensure a correct application and effective waterproofing.

- Liquid membrane application instructions

Applying the liquid membrane is an essential process to ensure proper waterproofing of surfaces. Here is a general guide for application:

1. Surface preparation: Thoroughly clean the surface to be treated, removing dirt, dust, and residues of old coatings.
2. Primer application: Apply the specific primer for the liquid membrane evenly, which will promote adhesion to the substrate.
3. Membrane application: Pour the liquid membrane and distribute it evenly with a brush, roller, or notched trowel.
4. Catalysis and drying: Respect the catalysis and drying times indicated by the manufacturer to ensure the maximum effectiveness of the coating. Carefully follow the manufacturer's instructions to achieve the best possible results.

**Guide to Epoxy Resin Application**

Applying epoxy resin is a process that requires precision and attention to detail. Here is a practical guide to successfully apply epoxy resin:

1. Preparation: Make sure you are in a well-ventilated and clean environment. Wear gloves, protective goggles, and a mask.
2. Measurement: Follow the manufacturer's instructions carefully to mix the resin and hardener in the correct ratio.
3. Application: Pour the resin onto the prepared surface and spread it evenly with a brush or spatula.
4. Air Bubbles: To prevent the formation of air bubbles, you can gently pass a gas torch over the surface.
5. Drying: Allow the resin to dry for the time indicated by the manufacturer, avoiding dust and drafts. By following these steps, you can achieve professional results in epoxy resin application.

Liquid silicone laying procedure

The procedure for laying liquid silicone is quite simple and can be carried out by following some fundamental steps:

1. Surface preparation: make sure the surface is clean, dry, and free from grease or dust.
2. Application of primer: to promote the adhesion of liquid silicone, it is advisable to apply a specific primer on the surface.
3. Silicone mixing: carefully follow the manufacturer's instructions for the correct mixing of the liquid silicone with the catalyst.
4. Silicone application: use a brush, roller, or spatula to evenly spread the liquid silicone on the surface.
5. Drying: allow the silicone to dry for the time indicated by the manufacturer, avoiding exposure to moisture during this period. By following these steps, it will be possible to achieve an effective and long-lasting laying of liquid silicone on different surfaces.

Use of Epoxy Resin Pigments - Step-by-Step Guide

To use pigments in epoxy resin, follow these steps:

1. Precisely measure the epoxy resin and the hardener according to the manufacturer's instructions.
2. Add the pigment to the epoxy resin and mix thoroughly until a uniform color is achieved.
3. Pour the mixture into the desired mold, taking care to eliminate any air bubbles.
4. Allow the resin to cure following the recommended drying times.
5. If necessary, apply additional layers of colored resin to achieve the desired effect.
6. Finally, protect the finished work with a clear coating for a lasting and glossy result. By following these steps, you can create beautiful works of art or customized DIY projects using pigments in epoxy resin.

“COLOURFUN” – Liquid Epoxy Resin Colourant Set

Intense and brilliant colour, ideal for Transparent Epoxy Resins. Mix small quantity to get a translucent effect. The high coverage of the "Colorfun Original" range allows to obtain a full and bright colour. The high concentration provides an opaque colour with a few drops. Usable to colour the products of the RESIN PRO range.

£13.45

“I–GUM” – Non-Toxic Silicone Putty for mould making

“I-GUM SLOW” – Non-Toxic Silicone Rubber – Paste Form Pasty silicone rubber “I-GUM” is a two–component product for creating moulds and forms for pouring with epoxy resin.

£22.85

“PURE MOULD” – Transluent Liquid Silicone rubber for creating moulds

Create your moulds using PURE MOLD silicone rubber! Compatible with many materials including resins, plaster and cement. Its transparency will allow you to observe through the mould and its high mechanical characteristics make it a product suitable for both professional and hobby use.

£22.45

“Epoxy Polish” – Epoxy Resin Polishing System

EPOXY POLISH is an advanced epoxy resin polishing system that delivers a stunning, glossy finish for your resin projects. Ideal for professionals and DIY enthusiasts alike, this product rejuvenates surfaces to a mirror-like shine with ease.

£17.85