What You’ll Need

• “Klebfix” – Two-Component Fast Epoxy Glue 2K, 25g Syringe: A rapid-setting two-part epoxy adhesive ideal for clear, robust bonds between resin objects.
• “FixExpress” – Two-Component Epoxy Glue 500g: A larger quantity option for extensive or repeated bonding tasks, also sets rapidly and ensures a reliable hold.
• Isopropyl alcohol and a lint-free cloth (for cleaning)
• Fine-grit sandpaper (about 400–800 grit)
• Mixing stick or spatula
• Disposable gloves
• Clamps or strong tape for holding pieces during cure

Lightly Roughen the Bonding Area

Epoxy loves a slightly textured surface. Lightly sand the bonding areas of both resin pieces using fine-grit sandpaper (400–800 grit). Aim for a uniform, frosted appearance—just enough to remove any gloss and give the glue microscopic ‘tooth’ for grip. Smooth, shiny resin can result in a weak joint, so don’t skip this crucial step. After sanding, wipe away all dust with your clean, dry cloth.

Join and Clamp the Pieces Securely

Position the two resin pieces together, aligning them carefully for the best fit. Press them together firmly, and use clamps or strong tape to hold them in place while the adhesive sets. Avoid shifting the pieces during this time, as disturbing the join may introduce weak spots or bubbles. The working time is short—just a few minutes—so ensure you have everything ready in advance.

Tips, Troubleshooting and Common Mistakes

Work in a well-ventilated area and always wear gloves to protect your hands from uncured adhesive. Don’t skip the surface preparation step: failure to sand and clean the join will almost always lead to a weaker bond. Use clamps for consistent pressure but don’t overtighten, as this can squeeze out too much adhesive and result in a fragile join. Any excess glue on visible surfaces can be wiped away before it hardens. If alignment shifts during clamping, carefully adjust right away before the adhesive sets.