Create unique, glossy stickers for crafts using resin safely.

Resin stickers offer a creative, durable way to make your own custom graphics, labels, or decorative pieces. This guide walks you through each stage of the process, from basic preparation to achieving that signature domed, glossy surface, so you can produce stunning results whether you’re crafting at home or for business.

What You’ll Need

• “Be Flex” – Transparent Polyurethane Doming Resin – Scratch-Resistant: A clear and flexible doming resin ideal for stickers on curved or outdoor surfaces.
• “UV–Creation” – Fast Acrylic Resin, 3 Minute UV Cure: Single-component UV resin for quick projects and smaller stickers.
• “Fairy Wings” – UV Resin for Volumetric Reliefs, Dual Colour, 30ml: Best for adding raised, decorative details or 3D effects.
• “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio: A clear epoxy suitable for simple, durable coating of sticker sheets.
• Printed sticker sheets or blank adhesive label material
• Mixing cups and sticks (if using two-part resins)
• Disposable gloves and workspace protection
• UV lamp (required for UV-curing resins)

See Resin Stickers in Action

See how resin doming transforms stickers—from flat prints to eye-catching, waterproof designs for creative, long-lasting labels. Inspiration for crafters and small businesses alike.

Step 2: Choose and Mix Your Resin

Select a resin that best matches your project goals. If your stickers need to bend or survive outdoors, opt for a Flexible, transparent finish by using a polyurethane doming resin. For fast results on small stickers, a UV-curing resin is ideal.

If you are using a two-part resin such as “One-2-One” – Epoxy Resin for Handcraft, 1:1 Mixing Ratio, carefully measure and mix the resin and hardener in equal parts by volume until no streaks remain. For single-component UV resins, like “UV–Creation” – Fast Acrylic Resin, 3 Minute UV Cure, you can use the product straight from the bottle—no mixing required.

Step 4: Cure and Finish Your Stickers

The curing method depends on your resin. UV resins require exposure to a UV lamp for 2–5 minutes per layer, while polyurethane and epoxy resins harden over several hours at room temperature. Cure fully before handling—premature removal can damage the finish.

Once cured, carefully peel the stickers from the non-stick backing. Check for any sticky edges and, if needed, trim or finish them with a craft knife.

Tips and Troubleshooting for Resin Stickers

To ensure the best outcome, always work in a well-ventilated area and protect your surfaces. Avoid over-pouring, which can cause resin to spill beyond the edge of your stickers. Eliminate bubbles by gently blowing on the surface before curing or using a pin for small air pockets. If working in layers, allow each to cure completely before applying the next. If your stickers lack shine or feel sticky, it may indicate under-curing or excess humidity—be patient with the process and check your environment.

Creative Ideas for Resin Stickers

Add colourful 3D details to planner stickers, DIY phone cases, or custom business logos. Fairy Wings UV Resin lets you create unique, raised effects with ease!