We offer resins for industrial cement-based floors, coloured self-levelling floors, garage floors, permeable pebble flooring and tile coatings.

Resins offer high wear resistance, easy maintenance, durability, waterproofing and a highly customisable aesthetic.

Yes, resin application requires specific climatic conditions to ensure proper adhesion and curing. It is advisable to avoid very low or very high temperatures and high humidity.

A permeable floor is a surface designed to allow rainwater to pass through it, preventing water stagnation and reducing the risk of flooding.
It is made of a special mix of granules and resin, allowing optimal water dispersion into the subsoil.

• Attractive and customisable appearance
• Very low application costs
• Excellent water drainage
• Resistance to weather conditions and frost
• Anti-slip surface
• Low maintenance
• DIY installation possible
• Greater durability compared to traditional floors in areas with frequent rainfall

• Outdoor areas subject to frequent rain
• Car parks and driveways
• Gardens and courtyards
• Pedestrian and cycle paths
• Public spaces such as squares and parks
• Shared areas such as terraces and yards

• Selected, washed and dried granules
• Epoxy binder

Application is extremely fast: if applied in the morning (with at least 20°C), it will be walkable after around 12 hours for light foot traffic. Maximum hardness (suitable for vehicles) is achieved after approximately 36–48 hours (depending on ambient temperature). At higher temperatures, these times are significantly reduced, speeding up the curing process.
A person with no experience can apply about 5 sqm per hour, including preparation. The more applicators involved, the shorter the overall working time.

• Preparation of the existing solid substrate
• Laying of the permeable material (granule and resin mix)
• Compaction and levelling of the surface
• Sealing or surface treatment, if required

Permeable flooring is very durable and does not require any special maintenance beyond that of a standard outdoor floor.

Its lifespan depends on the materials used and the maintenance carried out, but in general it can last for decades with proper care.

Yes, they help manage rainwater more sustainably, reduce flood risk and can contribute to groundwater recharge.

Costs are generally very low and vary depending on the selected square metres and site conditions. The price for the ResinPro system starts from £42.85/sqm. Contact our technical support for a personalised quote.

Yes, provided the installation is carried out correctly.

Absolutely. Application is simple and quick and does not require specific skills. For large surfaces, using a cement mixer is recommended to make mixing granules and resin easier.

Yes, granule and resin permeable floors are strong and suitable for pedestrian areas, driveways and car parks, provided appropriate materials and installation techniques are used.

Yes, it is possible. For light traffic, a 2 cm layer is sufficient. For heavy vehicles, a concrete base of at least 7–8 cm is recommended, or the application of a grass-reinforcement grid with a thicker mix. Have doubts? Ask us how to do it!

The resin cures under a wide range of conditions. The recommended minimum temperature is 10°C and the maximum is 40°C. At higher temperatures, curing times are reduced.

If damage occurs, it is sufficient to apply a new resin roll or a fresh mix to restore the floor to like-new condition.

• Correct resin dosage
• Dry surfaces, as humidity and wet substrates are the enemies of resin

Yes, but they must be washed and dried to avoid curing issues and aesthetic defects.

Depending on the quantity ordered, you will receive a box or a small pallet with all materials ready to use.

Don’t worry: ResinPro offers remote assistance and video support. Application is simple – you just need to mix the resin and granules thoroughly.

You can contact us by email, phone or WhatsApp. All contact details are available on our contacts page.